Product Details Portlet

G5NB PCB Power Relay

A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kV Impulse Withstand Voltage

  • Highly efficient magnetic circuit for high sensitivity (200 mW).
  • Small, yet provides 10-kV impulse withstand voltage (between coil and contacts).
  • Standard model conforms to UL/CSA/VDE standards.
  • Satisfies EN61010 reinforced insulation requirements.
  • IEC/EN 60335-1 conformed. (-HA Model)
  • Enable Smaller PCB Designs
    PCB Power Relays Type G5NB, Type G5Q
    Introduction of G5NB and G5Q

    Circuit designers face the constant challenge of shrinking PCB designs.
    Now, with OMRON G5NB and G5Q slim power relays, small PCB designs can be easier to create than ever.

Model 2D/3D CAD
G5NB-1A Download
G5NB-1A-CF Download
G5NB-1A-CF-PW Download
G5NB-1A-HA Download
G5NB-1A-HA-CF Download
G5NB-1A-HA-CF-PW Download
G5NB-1A-HA-PW Download
G5NB-1A-PW Download

Ordering Information

Terminal Shape Market Code Classification Contact form Enclosure ratings Model Rated coil voltage Minimum
packing unit
PCB terminals General purpose Standard SPST-NO (1a) Flux protection G5NB-1A 5VDC
100 pcs/Tray
(50 pcs/tube)
Sealed G5NB-1A4
Home Appliance High-capacity Flux protection G5NB-1A-E
Sealed G5NB-1A4-E
Flux protection G5NB-1A-E-HA 12VDC



Rated voltage 5 VDC 12 VDC 18 VDC 24 VDC
Rated current 40.0 mA 16.7 mA 11.1 mA 8.3 mA
Coil resistance 125 Ω 720 Ω 1,620 Ω 2,880 Ω
Must operate voltage 75% max. of rated voltage
Must release voltage 10% min. of rated voltage
Max. voltage Standard : 180% (at23ºC)
High-capacity : 170% (at23ºC)
Power consumption Approx. 200 mW


Load: Resistive load
Contact Type Single
Contact material Ag-alloy (Cd free)
Rated load 3 A at 125 VAC 5 A at 250 VAC
3 A at 30 VDC 3 A at 30 VDC
Rated carry current 3 A 5 A
Max. switching voltage 250 VAC, 30 VDC
Max. switching current 3 A 5 A


Contact resistance∗1 100 mΩ max.
Operate time 10 ms max.
Release time 10 ms max.
Insulation resistance∗2 1,000 MΩ min. (at 500 VDC)
Dielectric strength Between coil and contacts 4,000 VAC, 50/60 Hz for 1 min
Between contacts of the same polarity 750 VAC, 50/60 Hz for 1 min
Impulse withstand voltage Between coil and contacts 10 kV (1.2 x 50 νs)
Vibration resistance Destruction 10 to 55 to 10 Hz, 0.75 mm single amplitude
(1.5 mm double amplitude)
Malfunction 10 to 55 to 10 Hz, 0.75 mm single amplitude
(1.5 mm double amplitude)
Shock resistance Destruction 1,000 m/s2
Malfunction 100 m/s2
Durability Mechanical 5,000,000 operations min.
Electrical Standard (G5NB-1A, -1A4)
  • 200,000 operations at 125 VAC, 3A
  • 200,000 operations at 30 VDC, 3A
High-capacity (G5NB-1A-E, -1A4-E)
  • 100,000 operations at 250 VAC, 5A
  • 200,000 operations at 30 VDC, 3A
    (with a rated load at 1,800 operations/hour)
Failure rate (P level) (reference value)∗3 DC5V 10mA
Ambient operating temperature∗4 -40ºC to 85ºC (with no icing or condensation)
Ambient operating humidity 5% to 85%
Weight Approx. 4 g


(Unit: mm)

G5NB-1A(4)(-E), G5NB-1A-E-HA

  • Dimensions: G5NB-1A(4)(-E), G5NB-1A-E-HA

    ∗ Average value

  • PCB Mounting Holes (BOTTOM VIEW)

    Tolerance: ±0.1 mm

    PCB Mounting Holes
    Terminal Arrangement / Internal Connections
    Terminal Arrangement / Internal Connections

    (No coil polarity)


Correct Use

Coil Voltage Reduction (Holding Voltage) after Relay Operation
  • If the coil voltage is reduced to the holding voltage after Relay operation, first apply the rated voltage to the coil for at least 100 ms, as shown below.
  • A voltage of at least 40% of the rated voltage is required for the coil holding voltage. Do not allow voltage fluctuations to cause the coil holding voltage to fall below this level.
Coil Voltage Reduction (Holding Voltage) after Relay Operation
  Applied coil voltage Coil resistance Power consumption
Rated voltage 100% 125Ω (5 VDC)
720Ω (12 VDC)
2880Ω (24 VDC)
Approx. 200 mW
Holding voltage 40% Approx. 32 mW