XC5E Double-row Plugs, DIN Q-type, Fine-fit, W-shaped Pins
International DIN standards; Solderless Connection Series (Fine Fit)
- Backplane systems can be designed with ease with XC5 Connectors as conforming with DIN standards.
- Using unique W-shaped pins, these Connectors prevent contacts from being bent or falling out.
Ensures highly reliable connections.
- Less damage to the through-holes in circuit boards.
- Uses highly-reliable Twin-contact Sockets.
- A special Press-fit Tool is available.
- See the "Standards certification / conformity list" for information on conformity to certification standards.
|No. of contacts||Terminal type|
|Straight terminals,4 mm||Straight terminals,13 mm||Straight terminals,17 mm|
|Rated current||2 A|
|Rated voltage||300 VAC|
|Contact resistance||20 mΩ max. (at 20 mV, 100 mA max.)|
|Insulation resistance||106 MΩ min. (at 100 VDC)|
|Dielectric strength||1,000 VAC for 1 min (leakage current: 1 mA min.)|
|Total insertion force||0.59 N max. per contact|
|Removal force||0.15 N min. (with test gauge, t = 0.56 mm)|
|Insertion durability||200 times|
|Ambient operating temperature||Operating: -55 to 125℃ (with no icing at low temperature)|
■Ratings for Fine-fit Connectors
|Rated current||2 A|
|Contact resistance||5 mΩ max. (at 20 mV, 100 mA max.)|
|Pressure input||196 N max. per contact|
|Holding force||44.1 N min.|
|Unit torque durability||0.022 N-m min.|
|Vibration||At 10 to 2,000 Hz, 1.52-mm amplitude, or
147 m/s2 will will not interrupt current for more
than 1 μ sec.
|Shock||At 980 m/s2, will not break current for more than 1 μ sec.|
(With straight terminals)
|A||B||C||D||E||F||Coding Key positions
|64||94.8||88.8||78.74||85.2||83.9||90.00||6, 13, 20, 27|
|100||140.5||133.7||124.46||130.9||129.7||135.72||10, 20, 31, 41|
|Applicable Connectors||XC5□-□□□P Fine-fit|
|Max. pressure||2 t|
|Stroke (max.)||8 mm (handle)
283 mm (handle wheel)
|Base area||500 mm×530 mm|
|Contact Repair Tools|
|Support Block and Plungers|
|Note:Cut the XY2D-1014 when using Doublerow Connectors with 100 or 32 contacts.Cut the XY2D-1015 when using Triple-row Connectors with 100 or 32 contacts (no center row).|
Basic Mating Dimensions
The basic mating dimensions conform to those of the XC5. See page 11 of DIN Twin-contact Connectors XC5.
Press-fit Tools and Press-fit Precautions
OMRON provides manuals for Press-fit Tools and precautions. Contact your OMRON representative to request copies.
Holes with 1.0 mm dia. are required by the above Fine-fit Connector.
If the XG4A is stored with the lock half open, the resin parts may deteriorate, causing the lock to feel loose.
When a Connector is not used, close or open the lock completely before you store the Connector.
Mounting Prohibited area
Top jig side:
Mounting of parts is prohibited in the area of the max. outer shape + 1 mm.
Mounting of parts is prohibited in an area of the support block max. outer shape and plunger max. outer shape.
Note: An outline drawing of the 64-pin and 96-pin top jigs and support blocks is shown as a sample. For parts with other number of pins, contact your OMRON sales representative.